Hydraulic Pump/Motor

Your Current Location:Home|Products|Hydraulic Pump/Motor

  • A2F6.1Series of ration pump / motor

    Introductions:
    1. Fixed displacement motor of axial piston, bent axis design, suitable for hydrostatic drives in open and closed circuits
    2. For use in mobile and stationary application areas

    3. If operated as a pump, the flow is proportional to drive speed and displacement
    4. If operated as a motor, the output speed is proportional to the swept volume and inversely proportional to displacement
    5. High power density
    6. Compact design
    7. One piece pistons with piston rings

  • A2FE6.1 Fixed Displacement Plug-In Motor

    1.Fixed displacement motor with axial tapered piston rotary group of bent axis design, suitable for hydrostatic drives in open and closed circuits
    2.Primarily for installation in mechanical gearboxes, with compact structure and plug-in design,formed integrally with the gearbox.
    3. The output speed depends on the flow capacity of the pump and the displacement of the motor
    4. The torque increases with the pressure differential between the high and low pressure side and with increasing displacement
    5 .Small size, high efficiency, especially for walking and crawler winch.

  • A6VM(63) series Variable motor

    1.Variable motor with axial tapered piston rotary group of bent axis design, for hydrostatic drives in open and closed circuits
    2.For use in mobile and stationary application areas
    3.The wide control range enables the variable motor to satisfy the requirement for high speed and high torque
    4. Stepless adjustment, displacement can be from 0 to the maximum displacement
    5.. Output speed is proportional to the flow rate, and inversely proportional to the displacement
    6. Torque increases with increasing of displacement and the pressure of the high side and low side
    7. A variety of control and variables of devices, to adapt to different working conditions
    8. High power density, small moment of inertia

  • A6VE(63)Variable Plug-In Motor

    1.Variable plug-in motor with axial tapered piston rotary group of bent axis design for hydrostatic drives in open and closed circuits
    2. Easy assembly, simply plugs-in into mechanical gearboxes
    3. The design of the motor with the mounting flange in the center of the housing allows it to be almost fully integrated into a mechanical gearbox to give an extremely compact unit
    4. Wide adjustment range, the variable motor speed and torque to meet the high demands
    5. Stepless adjustment, displacement can be from 0 to the maximum displacement
    6. Output speed is proportional to the flow rate, and inversely proportional to the displacement
    7. Torque increases with increasing of displacement and the pressure of the high side and low side
    8. A variety of control and variables of devices, to adapt to different working conditions
    9. High power density, small moment of inertia

CopyRight 2008 All Right Reserved ShangHai Electric |  沪公网安备 31011202001794号
Address:Shanghai City Xin Zhu Road No. 2188 Tel:021-54302886 Fax:021-54302887

ShanghaiICP No.05016431